Wide range of materials with which we can make everything

Not only is there a choice of rubber types such as solid rubber, cellular rubber and foams, but within these categories the materials also have their own properties.

Our cellular rubber

Material

Attributes

EPDM

Cellular rubber

Suitable for technical applications, weather resistant. Available in the colours black, white or grey.

Chloroprene (CR/Neopreen®)

Suitable for technical applications, weather resistant, flame extinguishing.

EVA foam

Odourless and flavourless. Available in various colours. Frequently used for children’s toys, bath slippers, packaging and the medical industry.

Polyethylene foam

Suitable for glazing, cushioning in packaging and sealing tape. Available in various colours.

(Cellasto®/Vulkocell®)

Microcellular polyurethane rubber - Wear-resistant material used for buffers and ejectors for die cutting blades. Suitable for prolonged, frequent and tight compression. High compressibility and damping. Will keep its shape during prolonged impacts and use.

Silicone foam

Suitable for temperatures from -40℃ to 200℃. Odourless and flavourless, available in white and black.

Our technical foam

Material

Attributes

Polyester foam

Excellent compressibility, low weight. Suitable as sealing tape for inside doors or air treatment equipment. Also available with dust-proof and vapour-proof top layer.

PVC foam

Slow recovery grade – can be compressed to a very large extent and slowly springs back due to the very fine cell structure. Waterproof when compressed more than 30%. Very few signs of aging.

Filter foam

Very open structure, all walls between the cells have been removed by subsequent treatment. Used as an air filter in air treatment equipment. Available in 10 and 20 PPI (Pores Per Inch), as well as other porosities. Colour: black.

Sponge rubber based on natural rubber

Very resilient, wear-resistant, highly resistant to varying forces, water-resistant. Used in the shape of balls for the internal cleaning of pipes, for paper transport rolls, and many other applications. Available in cell sizes fine, medium or coarse. Colour: orange.

Our solid rubber

Material

Attributes

Wide-rib mat

Floor rubber with wide ridges for heavy-duty use. Comes in a thickness of 6 mm. Available in various colours.

Stud rubber mat

Widely used floor rubber for hospitals and kitchens etc. Stud height, diameter and colour available in several varieties. Also available in tile form.

Ebopol

Floor rubber made of bonded rubber granulate, water permeable, fairly soft, used for applications such as exhibition flooring and as a tile carrier. Available from 4 mm thickness up to 45 mm thick (as playground tiles that cushion falls).

Checker mat

Floor rubber with well-known non-slip pattern. Available in various colours. If desired also available in anti-static, oil-resistant or flame extinguishing version.

Fine-rib mat

Floor rubber with fine, longitudinal ridges. Available in a thickness of 3 mm. Colour: black or grey. The roll width is 1000 or 1200 mm, roll length 10 meters.

Fluoropolymer rubber

Resistant to acids, alkalis, petrol, chemicals, oil, solvent and ozone.

VMQ

Silicone rubber

Resistant to weak acids and alkalis. Flavourless and odourless. Good resistance to aging. Available in a colourless translucent variant and in white.

PU/Vulkollan®

Polyurethane rubber

Very resistant to abrasion and impacts. Resistant to petrol, oil and ozone.

CR/Neopreen®

Chloroprene rubber

Resistant to ozone, frost, all non-oxidizing acids. Fairly resistant to oil and grease.

NBR